InFocus LP 815 User Manual page 36

Screen Save: automatically blanks the screen after no signals are detected
for five minutes. The image returns when an active source is detected or a
remote or keypad button is pressed. Screen Save is disabled when Power
Save is enabled.
Screen Trigger: this enables the Screen Trigger connection on the connector
panel. See page 6 for details.
Startup Logo: allows you to display a blank Black, White, or Blue screen
instead of the default screen at startup and when no source is detected. It
also allows you to capture and display a custom startup screen.
Startup Logo
To capture a custom logo, display the image you want to capture on your
computer, highlight Capture New, then press Select twice. While the cap-
ture is underway, the LED on the keypad turns orange. When ready, the
projector confirms the capture and the LED changes to green.
The next time you start the projector, the custom logo you captured dis-
plays.
Blank Screen: determines what color is displayed when you press the
Blank button on the remote.
Blank Screen
34