Connecting A Video Device - InFocus LP 815 User Manual

Connecting a video device

Standard video connections
Plug the audio/video (A/V) cable's yellow connector into the video-out
connector on the video device. Plug the other yellow connector into the yel-
low Video 2 connector on the projector.
Plug a white connector into the left audio out connector on the video device
and plug a red connector into the right audio out connector on the video
device. Plug the remaining white connector into the left audio in connector
on the projector (to the right of the yellow Video 2 connector), and plug the
red connector into the right audio in connector on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an
S-video cable (sold separately) into the S-video connector on the video
device and into the Video 1 connector on the projector. Use the A/V cable's
audio connectors as described directly above (the yellow connectors on the
A/V cable are not used).
If the video device uses component cable connectors (sold separately), plug
the cable's green connectors into the green component-out connector on the
video device and into the green component connector (labeled "Y") on the
projector. Plug the component cable's blue connectors into the blue compo-
nent-out connector on the video device and into the blue component con-
nector (labeled "Pb") on the projector. Plug the component cable's red
connectors into the red component-out connector on the video device and
into the red component connector (labeled "Pr") on the projector. If you are
using RGB input, plug the additional connector into the Video 2/Synch con-
nector and turn on the RGB Video option in the Sources menu. See page 33.
To connect a progressive scan EdTV or HD component source, use the Com-
ponent to VESA adapter to connect the source.
connect A/V cable
connect power cable
connect S-video and video cables
connect component cables
and video cables
13
audio in
R trigger
computer 2 monitor out
network mouse computer 1
USB
L
audio in computer 3 serial control
computer in
audio in
R trigger
computer 2 monitor out
network mouse USB computer 1
L
audio in computer 3 serial control
I computer in
O
audio in
R trigger
monitor out
network mouse computer 1 computer 2
USB
L
audio in computer 3 serial control
computer in
I
O
audio in
trigger
R
monitor out
network mouse computer 1 computer 2
USB
L
audio in computer 3 serial control
computer in
I
O
audio in
R trigger
network mouse computer 1 computer 2 monitor out
USB
L
audio in computer 3 serial control
computer in
component to
VESA adapter