InFocus IN42ff User Manual page 31

Power Save: automatically turns the lamp off after no signals are
detected for 20 minutes. After 10 additional minutes with no signal, the
projector powers down. If an active signal is received before the projec-
tor powers down, the image will be displayed.
Screen Save
Screen Save: automatically blanks the screen after no signals are
detected for five minutes. The image returns when an active source is
detected or a remote or keypad button is pressed. Screen Save is disabled
when Power Save is enabled.
Startup Logo: allows you to display a blank Black, White, or Blue screen
instead of the default screen at startup and when no source is detected. It
also allows you to capture and display a custom startup screen (except
from an M1-D source).
To capture a custom logo, display the image you want to capture on your
computer and select the Capture New option. From the Capture New
menu, use the Capture Position X and Capture Position Y adjustments to
Capture New
Startup Logo
frame the logo to be captured. Press Capture Start in the Capture New
menu. The projector will let you know if the capture was a success or a
failure.
The next time you start the projector, the custom logo you captured dis-
plays.
Blank Screen
Blank Screen: determines what color is displayed when you press the
Blank button on an optional remote.
30