Table of Contents
Advertisement
Available languages
Available languages
PREPARATION BEFORE WASHING
PREPARATION BEFORE WASHING
PREPARATION BEFORE WASHING
PREPARATION BEFORE WASHING
ADJUST THE FOOT TO STABILIZE
THE WASHING MACHINE.
Adjustable foot. Rotating clockwise
will extend the foot, and rotating
counterclockwise will shorten the foot. Slightly incline
the washer first and loosen the adjustable foot knob
prior to rotating. Adjust all four corners of the washer
to ensure an even, stable surface with the ground.
Then tighten the adjustable foot knob and lock it. If
the ground is not flat, make corrections on the ground
surface, otherwise the washer barrel will spin on an
incline and knock into the washer cabinet.
CONNECT TO A
POWER SOURCE.
TURN ON THE
WATER SUPPLY.
Before washing clothes, take out any coins,
keys, and other hard items, while zipping up
zippers to prevent any damage.
ENSURE PROPER
PLACEMENT OF
DRAIN HOSE FOR
WATER DRAINING.
UPPER DRAINAGE
~34-40"
NOTE: The water will overflow when the
height of the drain hose is under 34".
INSTALL THE WATER
INLET HOSE.
TWO WATER INLET HOSES
PLACE
CLOTHES
INTO THE
WASHER
AND ADD A
SUITABLE
AMOUNT OF
WASHING
POWDER
BASED ON
LAUNDRY
VOLUME,
AND SELECT
WASH
CYCLE
PROGRAM.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MCSTCW21W2 and is the answer not in the manual?
Questions and answers
The washplate in my 2.0cf magi chef portable washing machine has come off and I don't know how to make the screw hold it in. Why would this happen and what to do about it. Please help.
The washplate on your Magic Chef MCSTCW21W2 portable washing machine may have come off due to improper installation, heavy loads, or residue buildup. To secure it, first ensure the unit is unplugged. Remove the washplate, clean it thoroughly, and check for any obstructions or damage. Then, properly reinstall it by aligning it with the central mounting point and pressing it firmly into place. If the issue persists, inspect for loose or damaged components and tighten or replace them as needed.
This answer is automatically generated