Switching The Electrobrush On And Off; How To Use The Electrobrush - Miele S 7000 Series Operating Instructions Manual

Switching the Electrobrush on
and off
The roller on the Electrobrush is driven
by a motor which can be switched on
and off.
^ Press the Carpet button on the
handle.
The Electrobrush will switch on. The
Electrobrush in-operation indicator light
in the control unit will light up yellow.
This button enables you to switch the
Electrobrush off during vacuuming and
the vacuum cleaner will continue to
operate using suction only. This is
useful when moving from vacuuming a
fitted carpet to a rug, for example.
The Electrobrush will switch itself off
automatically as soon as the cleaner
is raised to its upright position.

How to use the Electrobrush

^ To achieve the best results, pass the
Electrobrush slowly backwards and
forwards over the carpet or floor
covering.
For rugs and carpets with fringes,
always draw the Electrobrush from the
middle of the rug or carpet across the
fringe towards the floor.
Using the Electrobrush
21