NewAir AI-215 Series Owner's Manual page 12

Problem
The ice making cycle
appears to be normal
but no ice is being
produced.
The ice cubes are too
small.
The ice has a "plastic"
taste.
The unit produces a
large block of ice instead
of cubes.
The ice cubes have a
cloudy appearance.
12
Possible Cause
The refrigerant may be
leaking.
A pipe in the cooling
system may be
blocked.
Ambient temperature
or water temperature
in inner tank is too
high.
The ambient
temperature or water
temperature may be
too high.
The compressor may
need to warm up.
The unit's interior may
need to be cleaned.
The ambient
temperature may be
too low.
There may be trace
minerals in your water
or ice is being
produced too quickly.
http://www.NewAir.com
Solution
Consult a qualified
technician.
Consult a qualified
technician.
Please run the ice maker
below 90°F and pour
colder water into the
tank.
Select large sized ice
cubes by pressing the
"SELECT" button.
If this is the first time the
unit is being used, allow
the ice maker to cycle a
few times. This should
result in larger cubes.
Add a tablespoon of
lemon juice or vinegar to
a full tank of water and
allow the ice maker to
cycle a few times.
Unplug the unit and let
the ice thaw out. Allow
the ice maker to defrost
for a few hours and
restart the unit.
Ice cubes may develop
cloudiness when water is
frozen quickly. As ice
develops on the surface
of water, certain gases
can no longer remain
dissolved and begin to
surface as microscopic
bubbles. This cloudiness
is normal.