Installing Software - Lenovo ThinkCentre User Manual

7. Connect the power cable
the SATA cable to the appropriate SATA connector on the system board in your computer.
Figure 3. Connecting the power cable and SATA cable to the rear of the drive
8. Reinstall the computer cover.
Notes:
• Ensure that the drive is securely installed and that the cables are firmly connected.
• Ensure that the cables do not interfere with the computer cover, and that they do not block the system
fan blades or airflow paths.

Installing software

After you have installed the drive to your computer, you can install the software on the Software and User
Guide Disc. For the detailed software description, see "Software description" on page 2.
To install the software, do the following:
1. Save any open documents and exit all applications.
2. Insert the Software and User Guide Disc and do one of the following:
• If the disc starts automatically, go to step 3.
• If the AutoPlay window opens, click Run ViewHtml.exe. Then, go to step 3.
• If the disc does not start automatically, go into My Computer or Computer, browse the CD/DVD
drive, and double-click ViewHtml.exe.
3. Select your language.
4. On the left side of the window, click Software.
5. Follow the instructions on the screen.
4
ThinkCentre and Lenovo DVD-ROM Drive (Serial ATA) User Guide
1 and SATA cable 2 to the rear of the drive. Then, connect the other end of