Table of Contents
Advertisement
Quick Links
DVR42E
4CH Digital Video Recorder
User's Manual
ACI s.r.l. FARFISA INTERCOMS
Via E. Vanoni, 3
62029 OSIMO (AN) - ITALY
(Rif Mi3159)
Tel. (+39)071.720.20.38
Before operating the unit, please read carefully this manual and keep for future
Fax (+39)071.720.20.37
reference
e-mail: info@acifarfisa.it
www.acifarfisa.it
Advertisement
Table of Contents
Summary of Contents for FARFISA INTERCOMS DVR42E
- Page 1 DVR42E 4CH Digital Video Recorder User’s Manual ACI s.r.l. FARFISA INTERCOMS Via E. Vanoni, 3 62029 OSIMO (AN) - ITALY (Rif Mi3159) Tel. (+39)071.720.20.38 Before operating the unit, please read carefully this manual and keep for future Fax (+39)071.720.20.37 reference e-mail: info@acifarfisa.it...
- Page 2 Index WARNING Introduction to Digital Video Recorder Front panel buttons Rear panel RISK OF ELECTRIC SHOCK DVR installation Video output connection DO NOT OPEN! Video input connection Sensor installation Installation with external alarm systems WARNING: TO REDUCE RISK OF ELECTRIC SHOCK DO NOT Power up the unit REMOVE THE COVER.
-
Page 3: Front Panel Buttons
Front panel buttons Rear panel 1. S-Video output 2. Composite video output 3. Monitor: Secondary Video output 4. Video input 1. ! (Menu) button: press to display Operation menu option. 5. Video loop-through 2. ! (Recording button): press to start recording. 6. -
Page 4: Dvr Installation
DVR installation 3. Sensor Installation: The unit is equipped with 4 sensor input (one for each channel). - Sensor signal line connection: connect the signal line to the unit. The sensor signal terminal is usually at the sensor’s back panel. - Connect a suitable power adaptor into the sensor to power on it 1.Video output connection (Monitor) Connect monitor to the unit using the Video output connector on the rear... -
Page 5: Power Up The Unit
Power up the unit The On Screen Display After the unit is properly installed, the DVR is ready to record and play. Then 1. Power on the system apply power supply provided and switch on. MAIN MENU After the unit is powered on, the Press ! button HDD CHECKING CAMERA SELECT... -
Page 6: Operation Buttons
Main menu Channel display control In each mode(EACH) mode, you can use the following buttons to display Full- MAIN MENU Press ! to Operation Buttons CAMERA SELECT 1234 screen format of each channel. display menu RECORD SELECT 1234 Press to display menu RECORD MODE EACH option shown as... - Page 7 Record mode Record frame rate The unit provides 4 camera inputs. You can There are 6 different frame rate MAIN MENU MAIN MENU use channel buttons on the front panel to settings available operation: CAMERA SELECT 1234 CAMERA SELECT 1234 RECORD SELECT 1234 select specified channel for real-time display.
- Page 8 Video quality Recording Time Table: Each mode There are 3 different video quality settings for NB: The time table here below is for your reference only. Real HDD duration MAIN MENU operation: Normal, Low and High. will vary depending on the image complexity, color, Black & White, brightness, CAMERA SELECT 1234 contrast, image movement and background video noise.
-
Page 9: Important Notice
SETTING EXAMPLE: Password change 0:00 ~ 7:00 SENSOR RECORDING 7:00 ~11:00 RECORDING DISABLED Enter into “PASSWORD CHANGE” PASSWORD CHANGE 11:00 ~18:00 RECORDING CURRENT PASSWORD: ------- menu and the password change input 18:00 ~24:00 SENSOR RECORDING PASSWORD:------- menu replaces the “SUB MENU” (The PASSWORD CONFIRM:-------- default password is 111111). - Page 10 Backup through USB port Sequential time The unit provides one USB port to simple Use this menu to specify each channel display SEQUENTIAL TIME backup over the connection with PC. dwell time. Please mind the following steps to Dwell time settings determine from 1 sec to 9 PRESS (#$), THEN ( successful link.
- Page 11 2. SENSOR RECORD TIME: Sensor setup This function is setting how long recording will be stop after the alarm symptom disappear. If alarm symptom didn’t disappear, recording won’t stop. SENSOR RECORD TIME: Is it possible to set one of the following choices: 5s, 10s, 15s, 20s, 25s and 30s SENSOR SETUP Recording duration once sensor being (seconds).
- Page 12 How to operate motion detection recording Playback Follow the steps as described here SENSOR SETUP below to activate motion-detection Use the front panel buttons to SENSOR RECORD TIME recording. operate various playback ALARM OUT TIME 1.Please go to “SENSOR SETUP” functions.
- Page 13 1.! (Fast Forward button): Press this button to play the recorded stream faster. [PLAY] click the button to start playback from the beginning of the The unit provides five levels of fast forward playback speed: recorded video. !1: play one time faster (x1), press “!” button. !2: play two times faster (x2) than the normal play.
-
Page 14: Technical Specification
[FAST FORWARD] click to play streams faster (available speeds 1x, Description Remarks 4x, 16x, 32x, 64x). NTSC/PAL Video input format None Operating system [AVI] Save video in .avi format. Click on [AVI] button and specify the 4ch BNC Video input channel path and name of the saved file.