Connections; Connecting Inputs - Pioneer SVM-1000 Operating Instructions Manual

CONNECTIONS

CONNECTIONS
Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

POWER
AC IN
L R
Analog turntable
Pioneer DJ/VJ DVD players or DJ CD players
Audio cable connection
A DJ/VJ DVD or DJ CD player's audio output connectors can be
connected to this unit's DVD, DVD/LINE or LINE connectors.
When using the player's digital output, connect to this unit's
channel 2 or channel 3 DIGITAL IN connector. Use the AUDIO
INPUT selector switch (on top panel of this unit) to select the
proper connector.
Likewise, the control cord should be connected to the CONTROL
connector of the selected channel.
Video cable connection
A DJ/VJ DVD player's video output connectors can be connected
to this unit's DVD, VIDEO, or S-VIDEO connectors. When this is
done, use the VIDEO INPUT selector switch (on top panel of this
unit) to select the proper connector.
Likewise, connect a commercially available sync signal cable to
the SYNC OUT connector of the selected channel.
10
En
4 3
AUDIO OUT
SIGNAL GND
PHONO DVD/LINE LINE DVD MASTER OUT 1
R
L L
CONTROL CONTROL
R R
OFF
SYNC SYNC
ON
DIGITAL
OUT OUT
IN
VIDEO OUT
DVD DVD
COMPONENT
S-VIDEO S-VIDEO
Y
VIDEO VIDEO
L R L R
DJ/VJ DVD player or
DJ CD player
2
1 GND 2 HOT
MASTER REC
OUT BOOTH LINE
OUT 2
3 COLD
L MONITOR
(TRS)
L L
MASTER
R L
ATT.
-3 dB
-6 dB 0 dB
R R
DIGITAL OUT DIGITAL
IN
fs (Hz)
48 k 96 k
MASTER MONITOR
COMPOSITE
S-VIDEO
C B C R
S-VIDEO S-VIDEO
L R
Cassette deck, etc.
DJ/VJ DVD player or
DJ CD player
Connecting an analog turntable
Connect the audio output cables from an analog turntable to this
unit's Channel 1 or 4 PHONO input connectors, then set the
connected channel's AUDIO INPUT switch (on the upper panel of
this unit) to [PHONO]. This unit's PHONO input supports MM
cartridges.
Connect the ground wire from an analog turntable to the SIGNAL
GND terminal of the SVM-1000.
• Note that no PHONO input connector is provided for channel 2
and 3.
Connecting other line level output devices
To use a cassette deck or ordinary CD player, connect its audio
output connectors to one of the SVM-1000's LINE input connectors
(channel 1 to 4).
1
SIGNAL GND
DVD PHONO DVD/LINE
MIC2
L
CONTROL CONTROL
R
SYNC SYNC
OUT OUT MIDI
OUT
DVD DVD
USB
S-VIDEO
VIDEO VIDEO
L R R L
CD player, etc.
Analog turntable