Table of Contents
Advertisement
ASSEMBLY
• To hire an authorized service technician to
assemble the exerciser, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 5.
1. Attach the Front Stabilizer (31) to the Main
Frame (1) with two M6 x 62mm Bolts (53), two
M6 Washers (55), and two M6 Locknuts (54). Do
not tighten the Locknuts yet.
2. Attach the Rear Stabilizer (661) to the Main
Frame (1) with two M6 x 62mm Bolts (53), two
M6 Washers (55), and two M6 Locknuts (54).
See step 1. Tighten the M6 Locknuts (54).
• In addition to the included tool(s), assembly
requires the following tools:
two adjustable wrenches
one rubber mallet
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
1
31
55
53
2
54
6
54
1
53
55
66
Hide quick links:
Advertisement
Table of Contents
