Healthrider HRCR02411.0 User Manual page 7

3. Hold the Front Cover Panel (34) against the
Main Frame (1) in the indicated location.
Attach the Front Cover Panel (34) with four ST4
x 16mm Screws (57) and four M4 Washers (45).
4. Using a small plastic bag to keep your fingers
clean, apply some of the included grease to a
Frame Axle (13).
Attach the Handlebar Swing Arm (5) to the Main
Frame (1) with the Frame Axle (13), two Rubber
Washers (51), and two Axle Nuts (56).
5. Push the Magnet Bracket (36) into the hole in
the Pedal Frame (4).
Apply grease to the other Frame Axle (13).
Attach the Pedal Frame (4) to the Main Frame
(1) with the Frame Axle (13), two Rubber
Washers (51), and two Axle Nuts (56).
3
45
57
45
57
45
34
4
56
Grease
51
13
1
5
56
51
13
4
Hole
36
7
1
5
51 56
Grease
1
51
56