Table of Contents
Advertisement
Selecting the HDMI audio input source
See page 17 for details on connecting an HDMI or a DVI device to the TV/
DVD's HDMI input. If you connect a DVI device, to hear audio you must
also connect the analog audio cables to the HDMI audio IN jacks (see
page 17). Set the HDMI audio input setting to "DVI" with this connection.
If you connect an HDMI device and play media with digital audio output, to
hear digital audio set the HDMI audio input setting to "HDMI" with this connection.
If you connect an HDMI device but play media with analog audio output
(for example, certain CDVs do not output digital audio), to hear audio you
must also connect the analog audio cables to the HDMI audio IN jacks
(see page 17). Set the HDMI audio input setting to "DVI" with this connection.
To select the HDMI audio input source:
1. Press MENU, then press
or
to display the AUDIO menu.
2. Press
or
to highlight HDMI.
3. Press
or
to select HDMI or DVI.
A U D I O
W O W S R S 3 D
O F F
F O C U S
O F F
T r u B a s s
O F F
H D M I
H D M I
/ D V I
R E S E T
: S E L E C T
: A D J U S T
Adjusting the back lighting feature
If your TV/DVD is in a bright room, the screen image may be difficult to
see. You can use the BACK LIGHTING feature to adjust the screen
brightness for improved picture clarity.
To adjust the back lighting:
1. Press MENU, then press
or
until the SETUP menu appears.
2. Press
or
to highlight BACK LIGHTING.
S E T U P
C L O S E D C A P T I O N
O F F
P I C T U R E S I Z E
C I N E M A M O D E
F I L M
A S P E C T
O N
B A C K L I G H T I N G
1 6
: S E L E C T
: A D J U S T
3. Press a
or
to adjust the screen brightness.
Displaying on-screen information
Press DISPLAY to display the following on-screen information:
• Clock
• Channel number or Video input mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
• On timer, Sleep timer (if preset)
• Picture size
S T E R E O
S A P
T V - P G
L
V
O N T I M E R
1 2 : 0 0 A M
S L E E P T I M E R 2 h 0 0 m
A N T
F U L L
A B C D
0 0 2
C L O C K 1 2 : 0 0 A M C A B L E
Auto power off
The TV/DVD will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day and stops broadcasting on that channel. This feature does not work in Video input/PC/DVD
mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV/DVD and the power is resupplied, the Power Return feature will turn the TV/
DVD on automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord from
the wall outlet to prevent the TV/DVD from turning on in your absence.
40
DVD Playback
Playing a disc
This section shows you the basics on how to play a disc.
Basic playback
DVD
VCD
CD
Preparations:
When connecting to other equipment, turn the power off.
1. Press POWER on the unit or on the remote control to turn on the
unit.
The Power indicator will light.
• Every time you press POWER, the TV/DVD starts from TV mode.
• When using an amplifier, switch on the amplifier.
2. Press TV/DVD on the remote control to select DVD mode.
The DVD startup screen will appear on the screen. (If DVD disc
has already loaded, playback will start automatically.)
No Disc
3. Load the disc in the disc slot with the
label side facing forward. (If the disc
has a label.) Hold the disc without
touching either of its surfaces, align it
with the guides, and place it in position.
Note:
When you playback the 8cm disc, you need an adapter (not supplied).
4. On the TV screen, "No Disc" changes to "Reading" and then
playback commences.
No Disc
Reading
• A menu screen will appear on the TV screen, if the disc has a
menu feature.
Press
/
or /
to select title, then press ENTER. Title is
selected and play commences.
5. Press VOL + or – to adjust the volume.
VOLUME
32
6. Press STOP to end playback.
Resume feature
• Depending on the disc you are playing, when you press STOP one
time, the TV/DVD remembers the scene that was playing (" "
appears on screen). Press PLAY to resume playback from the
stopped scene.
• If you press STOP again or eject the disc, the unit will clear the
stopped scene (" " appears on screen).
42
Menu
Note:
The cold cathode fluorescent lamp used for
the back light on this TV/DVD has a limited
life. When areas on the screen darken, flicker,
or no longer light up, the lamp may be at the
end of its life. Contact your nearest Toshiba
Authorized Service Station.
Display
Menu
CAUTION
Keep your fingers well clear of the disc slot
when disc is loading or unloading.
Neglecting to do so may cause serious
personal injury.
Power
TV/DVD
Volume +/–
Enter
Play
Stop
Note:
Static electricity may affect the DVD player's
operation and cause it to not work properly. If
this happens, turn OFF the POWER,
disconnect and then reconnect the AC power
cord, and turn ON the unit again.
Picture/Audio adjustments in the PC mode
There are a number of picture settings you can adjust to optimize the
performance of the unit in PC mode.
PICTURE Menu
AUDIO Menu
P I C T U R E
AU D I O
B R I G H T N E S S
2 5
BA S S
2 5
T R E B L E
2 5
C O N T R A S T
5 0
H O R P O S I T I O N
2 5
BA L A N C E
0
S TA B L E S O U N D
V E R P O S I T I O N
2 5
O F F
P H A S E
2 5
WOW S R S 3 D
O F F
C L O C K
0
F O C U S
O F F
Tr u B a s s
O F F
R E S E T
: S E L E C T
: A D J U S T
: S E L E C T
: A D J U S T
Example: Adjust the contrast.
1. During PC mode, press MENU, then press
or
to display the
PICTURE menu.
2. Press
or
to select CONTRAST.
3. Press
or
to adjust CONTRAST.
4. Press EXIT to return to normal viewing.
DESCRIPTION ABOUT EACH SETTING OPTION
PICTURE menu
BRIGHTNESS:
To adjust the brightness of PC Monitor
screen.
CONTRAST:
To adjust the contrast of PC Monitor screen.
HOR POSITION:
To adjust the horizontal position of the image
on the PC Monitor screen. Each video standard
will require a different value for this setting.
VER POSITION:
To adjust the vertical position of the image on
the PC Monitor screen. Each video standard
will require a different value for this setting.
PHASE:
This must be adjusted after the frequency
has been set to optimize picture quality.
CLOCK:
To minimize any vertical bars or stripes
visible on the screen background.
RED/GREEN/BLUE: To adjust the color temperature of the PC
Monitor screen.
WXGA INPUT:
Set to ON, when you select the WXGA
mode on the PC.
Resetting your picture/audio adjustments in the
PC mode
The RESET function returns your picture quality adjustments to the
following factory settings:
PICTURE menu
AUDIO menu
Brightness ............ center (25)
Bass ....................... center (25)
Contrast ............... max (50)
Treble ..................... center (25)
Red ...................... center (25)
Balance .................. center (0)
Green ................... center (25)
Blue ...................... center (25)
To reset your picture adjustments:
1. Press MENU during PC mode.
2. Press 2 or 3 to select the desired menu.
3. Press
or
to highlight RESET, and then press
.
41
About
DVD
VCD
CD
The
icons on the heading bar show the playable discs
DVD
VCD
CD
for the function described under that heading.
: You can use this function with DVD video discs.
DVD
: You can use this function with Video CDs.
VCD
: You can use this function with Audio CDs and CD-R/RW discs.
CD
To start playback in the stop mode
Press PLAY.
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press PLAY.
• The sound is muted during still mode.
To stop playback
Press STOP.
To remove the disc
Press EJECT.
Remove the disc after the disc comes
out.
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 57).
• Some discs may take a minute or so to start playback.
• If you insert a single-sided disc the wrong way, "Reading" will appear on the display for about 1 minute and then "Incor-
rect Disc" will continue to be displayed.
• Some discs may not resume playing the same scene after stopping.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page
51.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs
according to the disc contents the software producers designed, some playback features may not be available. Also refer
to the instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use EJECT on the unit to unload and eject the disc. Do not push the disc while it is moving. Doing so may cause the unit
to malfunction.
• Do not put any objects other than discs in the disc slot. Doing so may cause the unit to malfunction.
• When you press a button, there may be a slight delay before the function activates.
43
Exit
Menu
Notes:
• If you wish to change the on-screen
language, follow the steps 1-3 on page 23.
• If no buttons are pressed for more than
approx. 60 seconds, the PC Monitor Menu
screen will return to normal Monitor screen
automatically.
• The PC Monitor Menu settings are not
effective for normal TV mode, DVD mode or
external input mode.
AUDIO menu
BASS/TREBLE/BALANCE: To adjust the sound quality of
PC mode.
STABLE SOUND:
To turn on or off the StableSound
®
feature in PC mode.
WOW SRS 3D:
To turn on or off the surround
effect in PC mode.
WOW FOCUS:
To turn on or off the vocal
emphasis effect in PC mode.
WOW TruBass:
To select your desired bass
expansion level (HIGH, LOW or
OFF) in PC mode.
Eject
Play
Stop
Pause
Advertisement
Chapters
Table of Contents
Troubleshooting
