Advertisement

Quick Links

Operating Guide

Please read this entire guide before beginning
Please read this entire guide before beginning

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProHunter SD-2500 and is the answer not in the manual?

Questions and answers

Summary of Contents for SportDOG ProHunter SD-2500

  • Page 1: Operating Guide

    Operating Guide Please read this entire guide before beginning Please read this entire guide before beginning...
  • Page 2: Table Of Contents

    Troubleshooting section, contact our Customer Care Center at 1-800-732-0144, or visit our website at www.sportdog.com. Please register your product within 90 days at www.sportdog.com or by mailing in the registration card. By registering, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster.
  • Page 3: Components

    Collar Receiver to deliver a harmless stimulation. With proper training, a dog will learn to associate this signal with a command. Like all SportDOG products, this model features adjustable stimulation levels so you can tailor the stimulation level to your dog’s temperament, eliminating the risk of over-correction.
  • Page 4: Key Defi Nitions

    Key Defi nitions Remote Transmitter: Transmits the radio signal to the Collar Receiver. It is waterproof and can be submerged in water. Intensity Dial: Provides multiple levels of stimulation so you can match the correction to your dog’s temperament. Transmitter Indicator Light: Indicates that a button is pressed and also serves as a low-battery indicator. Toggle Switch: This switch is factory-set to change between continuous and momentary stimulation.
  • Page 5: Prepare The Remote Transmitter

    Note: Approximate battery life between charges is 1 to 2 months, depending on frequency of use. Transmitter Indicator Light Remote Transmitter Function Indicator Light Response Continuous Stimulation or Tone Only Solid in color button pressed Momentary (Nick) Stimulation button pressed Single fl ash Low battery – Continuous Stimulation Flashes continuously button pressed www.sportdog.com...
  • Page 6: Prepare The Collar Receiver

    Step Prepare the Collar Receiver Charger connector placed Charge the Collar Receiver in Collar Receiver Charging Jack 1. Lift the rubber cover protecting the Charging Jack. 2. Connect the charger connector to the Charging Jack. 3. Plug the charger into a standard 110-volt AC wall outlet.
  • Page 7 • The batteries should last for a period of 3-5 years. When a battery needs replacement, you can order a new pack by calling our Customer Care Center at 1-800-732-0144. Please do not open the Collar Receiver or Remote Transmitter until you have received the replacement. www.sportdog.com...
  • Page 8: Fit The Collar Receiver

    Step Fit the Collar Receiver Important: The proper fi t and placement of the Collar Receiver is important for effective training. The Contact Points must have direct contact with your dog’s skin. To ensure a proper fi t, follow these steps: 1.
  • Page 9: General Training Tips

    At this point, your remote trainer is ready to use. The transmitter is factory set to mode 1, but you may wish to change the mode to fi t your situation. See Step 5, on the following page, for an explanation of mode options. www.sportdog.com...
  • Page 10: Program The Remote Transmitter

    Step Program the Remote Transmitter Note: The Transmitter is factory set to mode 1. The mode of the Remote Mode Transmitter can be changed to fi t your type or style of training. Button To change the mode: 1. Referring to the table below, adjust the Intensity Dial to the mode you want to use.
  • Page 11: Reset The Collar Receiver

    Once the Receiver Indicator Light has fl ashed 5 times, the Collar Receiver has been reset and will begin fl ashing as normal. If the Receiver Indicator Light does not fl ash 5 times, start over and repeat from A. www.sportdog.com...
  • Page 12: Program The Collar Receiver For Two-Dog Operation

    Step Program the Collar Receiver for Two-Dog Operation SportDOG Collar Receivers can be set to respond to either the up or down toggle ® switch position. A SportDOG Add-A-Dog receiver must be purchased to train a second dog in two-dog mode.
  • Page 13: Frequently Asked Questions

    ® Can I use the ProHunter 2500 Yes, SportDOG Add-A-Dog Collar Receivers must be purchased. For 3 or 6 dog operation, the Remote with more than one dog? Transmitter must be changed to mode 5 or 7 (refer to Step 8).
  • Page 14: Troubleshooting

    The answers to these questions should help you solve any problem you have with this system. If they do not, please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com. My dog is not responding when •...
  • Page 15: Test Light Instructions

    Part 15 of the FCC rules. Unauthorized changes or modifi cations to the equipment ® that are not approved by Radio Systems Corporation are in violation of FCC regulations and could void the user’s authority to operate the equipment and void the warranty. www.sportdog.com...
  • Page 16: Sportdog Add-A-Dog

    ® SportDOG Add-A-Dog Receivers & Beeper ® ® Note: The ProHunter 2500 Transmitter can be used with any SportDOG Add-A-Dog Receiver & Beeper below. Description Part Number FieldTrainer ™ Add-A-Dog - Standard Power SDR-FS ™ FieldTrainer Add-A-Dog - High Power SDR-FH ™...

Table of Contents