Language Setup; Audio Setup; Video Setup; Speaker Setup - Transonic TC2620DVD Instruction Manual

2. LANGUAGE SETUP

OSD LANG
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
2.1 OSD LANG- to select the ON-SCREEN DISPLAY language. English is the defaulted language in the factory default.
2.2 AUDIO LANG- to select the preferred Audio language. English is the defaulted language in the factory default.
2.3 SUBTITLE LANG- to select the preferred Subtitle language. English is the defaulted language in the factory default.
2.4 MENU LANG- to select the preferred Menu language. English is the defaulted language in the factory default.

3. AUDIO SETUP

AUDIO OUT
DUAL MONO
EXIT SETUP
3.1 AUDIO OUT-
There are three options: SPDIF/OFF, SPDIF/RAW and SPDIF/PCM.
SPDIF/OFF: There will be no signal from the coaxial output.
SPDIF/RAW: Choose this setting if your DVD player is connected to a power amplifier with a coaxial cable, and playing a disc
recorded with Dolby Digital, DTS and MPEG audio formats. The corresponding digital signals will be output from the Coaxial Output
jack. This player's digital output jacks are designed for a connection to a Dolby Digital, DTS or MPEG receiver or decoder.
SPDIF/PCM: Choose this setting if your DVD player is connected to a 2-channel digital stereo amplifier; When playing a disc
recorded with Dolby Digital and MPEG audio formats. The audio signals will be modulated into a 2-channel PCM signal, and it will be
output from the Coaxial Output jack.
3.2 DUAL MONO-
There are three options: STEREO, MONO L, MONO R.

4. VIDEO SETUP

BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
4.1 BRIGHTNESS-
4.2 CONTRAST-
4.3 HUE-
4.4 SATURATION-
4.5 SHARPNESS-

5. SPEAKER SETUP

DOWN MIX
EXIT SETUP
5.1 DOWN MIX-
There are three options: LT/RT STEREO and VSS.
LT/RT: Choose this setting, the sound will be output form left and right audio output terminal.
STEREO: Choose this setting, and while 5.1 channel sound playing, the two channels of signals will be output from the left and right
soundtrack; when 2-channel sound playing, the stereo signal will be output.
VSS:Virtual Surround System.
it is used to set up the audio output mode.
:
it is used to adjust the brightness.
it is used to adjust the contrast.
it is used to adjust the hue.
it is used to adjust the saturation.
it is used to adjust the sharpness of the video.
it is used to setup the Audio output.
--15--