System Setup; Initial Settings; Language Setup; Audio Setup - Transonic TC2120PD Instruction Manual

INITIAL SETTINGS

1.SYSTEM SETUP

SYSTEM SETUP SYSTEM SETUP
TV SYSTEM
LCD MODE
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.1 TV SYSTEM - It is used to select the TV mode.
Options: NTSC / PAL/ AUTO
Please select this option as per your TV set.
1.2 LCD MODE - It is used to select the LCD MODE.
Options: 4:3 16:9
1.3 TV TYPE- it is used to select the TV scan mode,
please set as per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : normal Letter box mode
16:9 : 16:9 wide screen mode
1.4 PASSWORD/CHANGE
system. The steps are as follows:
1.4.1 Enter SYSTEM SETUP , select the PASSWORD item
by scrolling the down navigation button, and then press
the right navigation button to select the input box.
1.4.2 Input user's password"0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then
press SELECT button to confirm. When the password
is changed, you are needed to input the new one to
unlock the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE : If wrong password was input in unlock status, the
system will lock.
1.5 RATING - Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options: 1 KID SAFE/2 G/ 3 PG/ 4 PG 13/ 5 PG-R/ 6R/7
NC-17/ 8 ADULT
1.6 DEFAULT - Reset to factory settings.
Options: RESTORE

2. LANGUAGE SETUP

LANGUAGE SETUP LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
2.1 OSD LANGUAGE - It is used to select different On Screen
Display language for different user.
Options: ENGLISH
(The number of these options depends on the customer's need.)
select preferred audio language.(DVD
2.2 AUDIO LANG -
only, need disc software support)
2.3 SUBTITLE LANG- Select preferred subtitle language.
(DVD only, need disc software support)
2.4 MENU LANG - Select preferred disc menu language.
(DVD only, need disc software support)
- input password to unlock the

3. AUDIO SETUP

AUDIO SETUP AUDIO SETUP
AUDIO OUT
EXIT SETUP
3.1 AUDIO OUT - Set digital output code format.
Options:
f you are not connecting to an amplifier via
SPDIF/OFF: I
digital output, please select this option.
Used in general home theatre, select this can
SPDIF/RAW:
output 5.1 channels audio.
elect this it can only output 2 channel, but you
SPDIF/PCM: S
will get higher quality audio output.

4. VIDEO SETUP

VIDEO SETUP VIDEO SETUP
BRI
CON
HUE
SATURATION
EXIT SETUP
4.1 BRI-- to set the brightness for the display.
Options: 0/2/4/6/8/10/12
4.2 CON--to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
4.3 HUE--to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
4.4 SATURATION--to set the saturation level for display.
Options: 0/2/4/6/8/10/12

5. SPEAKER SETUP

SPEAKER SETUP SPEAKER SETUP
DOWNMIX
EXIT SETUP
5.1 DOWNMIX
Options: LT/RT- Left/Right mix mode
STEREO- Stereo mode
8