System Setup - Transonic TC2620DVD Instruction Manual

Initial Settings
Once the initial programming is entered it is stored in memory until changed, the player can always be operated under the same conditions.
The settings will be retained in the memory until the settings are changed even after setting the player to the standby mode.
Common procedure for initial settings
1. Press the "SETUP" button.
2. Use the navigation buttons to move and select preferred option, then press the "ENTER" button.
3. Use navigation buttons to move to another main setup items when not selecting any submenu option.
4. Press the "SETUP" button or choose "EXIT SETUP" item to close setup menu in any mode.

1. SYSTEM SETUP

TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.1 TV SYSTEM-
1.2 SCREEN SAVER-
feature is to protect the screen from damage. You can set the screen saver on or off.
1.3 TV TYPE-
Options:
4:3 PS: Choose this setting if your DVD player is connected to a normal TV (4:3 ratio). You can fill the movie to the entire screen of you
TV. This might mean that parts of the picture (the left and right edges) won't be seen.
4:3 LB: Choose this setting if your DVD player is connected to a normal TV (4:3 ratio). Selecting this setting you'll see the entire frame of
the movie, but it will take up a smaller portion of the screen vertically. The movie might appear with black bars at the top and bottom of
the screen.
16:9: Choose this setting if your DVD player is connected to a wide screen TV.
1.4 PASSWORD-
The PASSWORD option allows you to set up the rating limits and lock your player to control the type of content your family watches. The
parental control feature is a rating system for DVDs, like movie ratings.
When the player is locked, you need to enter the password in order to play discs that have a higher rating than what you've allowed. If
the player is unlocked, no password is required to play discs. Even if you've set rating limits, they won't be enforced until the player is
locked.
Note: Once the player is unlocked, you can change the password to any 4-digit number.
If you forget your password, enter the factory preset password: 0000.
1.5 RATING- it is used to set the rating of the disc.
Options:
The higher the level is, the fewer the restricted discs are. If set at level 8, there is almost no disc restriction.
If set at R level, maybe some types of discs can't be played, unless enter correct password, unlock and amend the age control level.
1.6 Default- Restore to factory settings.
It is used to select the TV system. There are two options: NTSC and PAL.
When your DVD player is in stop, tray open, or no disc state, the screen saver will turn on after 3 minutes. This
it is used to select the TV output mode.
4:3 PS (Pan & scan mode)
4:3 LB (Letter box)
16:9 (Wide screen)
1. KID SAFE
2. G
3. PG
4. PG13
5. PG-R
6. R
7. NC-17
8. ADULT
--14--