Siriusxm Satellite Radio Operations; Displaying The Identification (Id) Code; Storing Channel Presets; My Music Scan - Clarion M502 Owner's Manual & Installation Manual

SiriusXM Satallite Radio Operations
Displaying the Identification (/D)
Code
Before you listen to satellite radio, you must
subscribe to the service using the SiriusXM
Radio ID number.
1. Press the [CONTROL] knob on the front
panel or [SRC I <!>] button on the remote
control to activate SiriusXM-mode.
2. Press the [CONTROL] knob (left/right) to
select channel "0".
The unit displays Radio 10.
Notes:
1. The Radio ID is located on the bottom of
the SiriusXM Connect Vehicle Tuner.
2. Please note that the SiriusXM Radio ID
does not include the letters I, 0, S or F.
3. Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods below:
• Online: Go to "www.siriusxm.com/
activatenow" and choose ACTIVATE
RADIO.
• Phone: Caii1-800-XM-RADIO (1-800-967-
2346).
Storing Channel Presets
1. Press [BAND/TOP] button on the remote
control or long-press [CONTROL] knob
(up) on the front panel to select the desired
band you want to store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of [BAND/TOP] button on the
remote control or long-press [CONTROL]
(up) on the front panel changes the band:
SXM1 -> SXM2 -> SXM3 -> SXM1
2. Tune to the desired channel and then
press and hold one of the preset buttons
(1 through 6) on the remote control to store
the channel.
3. Repeat the procedure to store up to 5 other
channels on to the same band.
Note:
• A total of 18 channels can be stored in the
preset memory, 6 channels for each band
(SXM1 ,SXM2 and SXM3).
Tuning Channels using Presets
1. Press [BAND/TOP] on the remote control or
long-press [CONTROL] knob (up) on the front
panel to select the desired band of Presets
you wish to access.
2. Press [CONTROL] knob (up/down) to the
preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in
memory.
Category Browsing
1. Press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL] knob
to choose "ADJUST", then to choose the
"SEARCH", and rotate [CONTROL] knob to
select
UCAT
MODE SELECT" to activate the
Category Browsing mode.
2. Rotate [CONTROL] knob to select desired
category.
3. Press [CONTROL] knob (left/right) to select
desired channel within the selected Category.
You can see channel name, channel number,
artist, title or content by pressing [DISP] on
the remote control.
4. Press (CONTROL] knob to tune to selected
channel.
Note:
• If no operation is performed for 10 seconds
or press [CONTROL] knob (up), the Category
Browsing mode is canceled.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press and hold the [PS/AS] button on the
remote control.
2. When a desired station is tuned in, press the
[PS/AS] button on the remote control again to
continue receiving that station.
Channel scan {In current category)
Channel scan receives the channel (in current
category) in order. This function is useful when
searching for a desired channel in current
category.
SiriusXM Satallite Radio Operations
1. Press the [PS/AS] button on the remote
control.
2. When a desired channel is tuned in, press
the [PS/AS] button on the remote control
again to continue receiving that channel.
Note:
• Be careful not to press and hold the
[PS/AS] button on the remote control for
1 second or longer, otherwise the preset
scan function will begin and the unit starts
scaning presets.
Artist & Song Alerts
While listening to SiriusXM Satellite Radio,
you can be alerted when your favorite songs
or artists are playing on other channels. The
radio will display an Alert message when a
matching artist or song is found on another
channel. Then you can choose if you want to
tune to that favorite or you can ignore it and
stay on your current channel. Information
on setting up the Artist and Song alerts is
described below.
1. While listening to favorite song, short-
press [RPT] button on the remote control
to add the artist or long-press [RPn on the
remote control button to add the song to
the "Artist & Song Alerts" list.
Press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL]
knob to choose ADJUST, then to choose
the SEARCH, and rotate [CONTROL]
knob to select "ALERT LIST".
Rotate and press [CONTROL] knob to
select desired alert item. Then select UON"
to activate alert, "OFF" to deactivate or
"DELETE" to delete this item. (press and
hold [CONTROL] knob) You can also
activate and deactivate Alert function in
System Setup menu.
Notes:
• You can store up to 50 items for Artist
& Song Alerts. "XU(sed)/YE(mpty)" is
displayed when the new item .is stored. X
is the total number of song titles or artist
names stored in memory, and Y is the total
number memory locations still available for
storage.
• If either the artists or song title is not
available, "NO SONG" or "NO ARTIST" will
be displayed.
• If you try to store item when memory is full,
"MEMORY FULL" is displayed. If you want
to store another, please delete exsisting
alert item.
Receiving and Tuning to an Alert
Whenever a stored artist or song is playing
on another channel, alert message "ART
ALERT"or "SNG ALERT" appears on the unit
display.To tune to artist or song identified by
the alert, press [ROM] button on the remote
control.
Notes:
• If no operationg is performed for 5
seconds,the unit returns to normal mode.
• Artist name and Song title which you have
stored and which are currently playing will
be displayed in category called "MY MUSIC"
in search mode.
My Music search
You can access the channels which is
broadcasting the contents in the activated Alert
list.
1. Press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL] knob
to choose ADJUST, then to choose the
SEARCH, and rotate [CONTROL] knob to
select "MY MUSIC LIST".
2. Press [CONTROL] knob to display matched
songs which are currently broadcacsted
3. Rotate [CONTROL] knob to select desired
song, and press [CONTROL] to tune to that
channel.
Note:
• If there is no matched songs broadcasted, it
displays "MEM EMPTY".
Rep lay function
The Rep lay feature allows you to pause,
rewind, and replay up to 30 minutes of live
SiriusXM Satellite Radio.
M502
9