Panasonic CS-E7GKEW Operating Instructions Manual page 8

Gk, dt, dd, db, gf-series)
Hide thumbs Also See for CS-E7GKEW:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
HOW TO OPERATE
CS-E15DB4EW, CS-E18DB4EW, CS-ME10DTEG, CS-E15DTEW, CS-E18DTEW, CS-E9GFEW,
CS-E12GFEW, CS-E18GFEW, CS-ME10DD3EG, CS-E15DD3EW, CS-E18DD3EW
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
Inserting the batteries
Pull out
Close
• The batteries can be used for approximately 1 year.
Replace the batteries when the remote control display or
transmission signal becomes weak.
Setting the current time
TIMER
ON
1
2
OFF
Press
CHECK
CLOCK
MODE OPERATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
OFF/ON
Select
Turn on
AUTO
HEAT
DRY
COOL
AUTO MODE - FOR YOUR CONVENIENCE
• Unit selects the operation mode according to temperature
setting, outdoor and room temperature.
• Operation mode is reselected every 3 hours. During
operation mode selection the power indicator blinks.
HEAT MODE - TO ENJOY WARM AIR
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
COOL MODE - TO ENJOY COOL AIR
DRY MODE - TO DEHUMIDIFY THE
ENVIRONMENT
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
● The range of temperature for selection is 16°C ~ 30°C.
● Operating the unit within the recommended
temperature could induce energy saving.
HEAT MODE : 20°C ~ 24°C.
COOL MODE : 26°C ~ 28°C.
DRY MODE : 1°C ~ 2°C lower than room temperature.
8
(For DB, DD, DT, GF-series indoor unit)
Insert AAA or
R03 batteries
Set time
SET
Confi rm
3
CANCEL
RESET
TEMP
Adjust
temperature
(DB-Series)
(DD-Series)
REMOTE CONTROL TRANSMITTER
For use with DB, DD, DT, GF-series indoor unit.
• Make sure it is not obstructed.
• Certain fl uorescent lights may interfere with signal transmission.
Please consult your nearest dealer.
Maximum distances : 8m
Notes:
• Press
button to restore the remote control's default
setting.
• While using remote control, please be aware of the OFF
indication on the remote control display to prevent the unit
from starting / stopping improperly.
(GF-Series)
(DT-Series)
POWER
POWERFUL TIMER
QUIET
INDICATOR
INDICATOR
INDICATOR
INDICATOR
Remote
control
display

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents