Panasonic CS-E7GKEW Operating Instructions Manual page 7

FEATURE OPERATION FEATURE OPERATION
FEATURE OPERATION FEATURE OPERATION
TO SELECT FAN SPEED
• There are 5 fan speeds, as well as
automatic*.
* For automatic fan speed, the speed
of the indoor fan is automatically
adjusted according to the operation.
• Keeps the room ventilated.
• There are 5 options for horizontal/
vertical airfl ow direction.
• Do not adjust the horizontal and
vertical louvers by hand.
• If automatic horizontal/vertical airfl ow direction has been set, the
louvers swing left/right and up/down automatically.
• In heat mode, the air blows horizontally for a while, then starts
to blow downwards and the airfl ow louver start to swing left/right
after the temperature rises.
TO MONITOR AIR QUALITY
• This setting enables the patrol sensor
to automatically detect the air quality.
• When the air quality is unsatisfactory,
e-ion operation will start automatically.
TO ENJOY CLEAN AIR
• This setting provides clean air by producing
negative ions to attract dust which will then
be captured at the positively charged e-ion
fi lters.
TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by
reducing the airfl ow noise.
TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired
temperature to be reached quickly.
● , ,
modes and could be cancelled by pressing the respective button
again.
and or
●
activated at the same time.
and operations could be activated even when the
●
air-conditioner is turned off. In this condition, once e-ion indicator
is ON, the unit will operate with AUTO fan speed and air swing.
However, operation could not be activated if other indoor
unit is activating heating operation.
TO ADJUST AIRFLOW
DIRECTION
and operations are available in all
and operations could not be
TIMER SETTING TIMER SETTING
TIMER SETTING TIMER SETTING
TO SET THE TIMER
• When you want the air conditioner to turn ON or OFF
automatically at a preset time.
Select ON Set the
or OFF desired
timer. time.
To cancel ON or OFF timer, press
or , then press
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the temperature you preferred.
• The timers repeat daily once set.
• If there is a power failure, you can restore the
previous setting (once power is resumed) by pressing
the button.
• If the timer is cancelled, press
previous setting.
● The timer is based on the time set in the remote
control.
● You can set your preferred time for ON and OFF
timers.
Hints
■ Temperature setting of 1°C higher in cool mode or
2°C lower in heat mode than the desired temperature
performs a 10% power saving.
■ To reduce power consumption during cool mode, close
the curtains to prevent the sunlight and heat from
coming in.
■ To disable the PATROL operation during unit start with
, press and hold
release.
To reset, press again for 5 seconds then release.
■ To set either 12-hour (am/pm) or 24-hour time
indication, press and hold
seconds.
■ To dim the indicator display on the air conditioner:
Press and hold for 5 seconds.
To reset, press again for 5 seconds.
■ To switch the temperature setting to °C or °F, press and
hold for approximately 10 seconds.
● To turn off the air conditioner, press
Confi rm
the setting.
.
to restore the
for 5 seconds then
for approximately 5
.
7