NETGEAR DG834GSP Reference Manual page 57

These options are discussed below.
Figure 4-3
Restricting Access to Your Network by Turning Off Wireless Connectivity
You can completely turn off the wireless portion of the DG834GSP. For example, if your notebook
computer is used to wirelessly connect to your router and you take a business trip, you can turn off
the wireless portion of the router while you are traveling. Other members of your household who
use computers connected to the router via Ethernet cables will still be able to use the router.
Hiding Your Wireless Network Name (SSID)
The DG834GSP can restrict wireless access to your network by not broadcasting the wireless
network name (SSID). However, by default, this feature is turned off. If you turn this feature on,
wireless devices will not 'see' your DG834GSP. You must configure your wireless devices to
match the wireless network name (SSID) you configure in the ADSL Modem Wireless Router.
Note: The SSID of any wireless access adapters must match the SSID you configure in
the 54 Mbps ADSL Modem Wireless Router Model DG834GSP. If they do not
match, you will not get a wireless connection to the DG834GSP.
Restricting Wireless Access Based on the Wireless Station Access List
This list determines which wireless hardware devices will be allowed to connect to the modem
router.
To restrict access based on MAC addresses, follow these steps:
1. Log in to the DG834GSP modem router at its default LAN address of http://10.1.1.1 with its
default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
Wireless Configuration
Reference Manual for the ADSL Modem Wireless Router DG834GSP
v1.0, June 2007
4-9