Deactivating A Vpn Tunnel - NETGEAR DG834GSP Reference Manual

Deactivating a VPN Tunnel

Sometimes a VPN tunnel must be deactivated for testing purposes. There are two ways to
deactivate a VPN tunnel:
• Policy table on VPN Policies page
• VPN Status page
Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel
To use the VPN Policies page to deactivate a VPN tunnel, perform the following steps:
1. Log in to the Modem Router.
2. Open the DG834GSP management interface and click on VPN Policies to get the VPN
Policies screen (Figure
Figure 8-33
3. Clear the Enable check box for the VPN tunnel you want to deactivate and click Apply. (To
reactivate the tunnel, check the Enable box and click Apply.)
Using the VPN Status Page to Deactivate a VPN Tunnel
To use the VPN Status page to deactivate a VPN tunnel, perform the following steps:
1. Log in to the Modem Router.
Virtual Private Networking
Reference Manual for the ADSL Modem Wireless Router DG834GSP
8-33).
v1.0, June 2007
8-35