NETGEAR DG834GSP Reference Manual page 134

Reference Manual for the ADSL Modem Wireless Router DG834GSP
Table 8-4. VPN Tunnel Configuration Worksheet
Connection Name:
Pre-Shared Key:
Secure Association -- Main Mode or Manual Keys:
Perfect Forward Secrecy -- Enabled or Disabled:
Encryption Protocol -- DES or 3DES:
Authentication Protocol -- MD5 or SHA-1:
Diffie-Hellman (DH) Group -- Group 1 or Group 2:
Key Life in seconds:
IKE Life Time in seconds:
VPN Endpoint
DG834GSP_A
DG834GSP_B
Note: The LAN IP address ranges of each VPN endpoint must be different. The
connection will fail if both are using the NETGEAR default address range of
10.1.1.x.
Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard.
1. Log in to the DG834GSP on LAN A at its default LAN address of http://10.1.1.1 with its
default user name of
main menu to display this screen. Click Next to proceed.
8-22
Local IPSec ID LAN IP Address
GW_A 10.1.1.1
GW_B 192.168.0.1
and password of
admin
v1.0, June 2007
Subnet Mask
255.255.255.0
255.255.255.0
. Click the VPN Wizard link in the
password
GtoG
12345678
Main
Disabled
3DES
SHA-1
Group 2
(8 hours)
28800
(1 hour)
3600
FQDN or Gateway IP
(WAN IP Address)
14.15.16.17
208.32.25.25
Virtual Private Networking