Mode Functions - Panasonic DP-130 Operating Instructions Manual

Mode Functions

14
Energy Saver Mode/Auto Off Mode
Energy Saver Mode
# To enter this mode
Press Energy Saver key. The indicator will flash.
Automatically enters after 15 minutes from the last copy.
$ To cancel this mode
Press Energy Saver key again.
Auto Off Mode
# Automatically enters after 30 minutes from the last copy.
Power consumption will drop and the Energy Saver key indicator will light.
$ To cancel this mode.
Press Energy Saver key.
If you wish to change the above settings or if you need more information, call your Panasonic
authorized dealer.
Normal Operation
Energy Saver mode
Auto Off Mode
Toner Saver Mode
# To enter this mode.
Press and hold % Select key, then press Paper Tray key.
$ To cancel this mode.
Press and hold % Select key, then press Paper Tray key.
This Toner Saving Mode is to save toner consumption by copying dark originals lighter.
The exposure indicator "LIGHT" flashes when Toner Saving Mode is on.
Auto Start function
While the copier is warming up, you may position your original on the copier, enter your copy job
selections and press the Start key. The Wait indicator (Start key) will flash until the warm up
cycle is completed and the copy job will automatically start.
Note: Please enter your copy job, when "1" appears in the display.
Power Consumption
Approximately 60 Wh
Approximately 35 Wh
Approximately 1.5 Wh
Warm Up Time
None
5 seconds
20 seconds