Using A Password; Password Setup - Franklin TWE-510 User Manual

Using a Password

You can use a password to keep the information in the
Phone List private. The password is requested when
the unit is turned on and the Phone List is accessed.
Password Warnings
Warning! After you set the password, you must enter
the password to access the phone list for the first time
during a session. Always record your password and
keep it in a separate place.
If you forget the password, you must reset the unit to
access the phone list. Warning! Resetting the unit
erases all user-entered information. Always keep writ-
ten copies of your data.
If you do not have a reset button located on the back of
your unit, remove the batteries, wait at least two min-
utes, and then re-install them. For battery instructions,
see Installing the Battery.
If you have a reset button, use the end of a straight-
ened paperclip to gently press the reset button.
If the unit does not reset after pressing the reset button, fol-
low the above instructions for removing the batteries.

Password Setup

1. Press .
2. Use to see Set Password and press
ENTER.
14