Compact Flash Installation Procedure - Fast Forward Video mini dvr pro User Manual

Compact flash model digital video recorder
Hide thumbs Also See for mini dvr pro:
Table of Contents

Advertisement

Connector Pinouts
Video, RS-232 I/O; Trigger, Audio In
The mating connector: HR25-9P-20PC.
1
CV or Y In
2
Trig 1
3
GND
4
C In
5
GND
6
RS-232 - Txd
7
RS-232 - Gnd
8
RS-232 - Rxd
9
Trig2
10
Ref In
11
Microphone In
12
GND
13
L Line In - Audio
14
GND
15
R Line In - Audio
16
Y Out
17
GND
18
C Out
19
GND
20
Composite Out

Compact Flash Installation Procedure

To install the Compact Flash Cards, follow the procedure below:
Be sure to have Power OFF prior to installing or removing Compact Flash parts. Grasp DVR in left hand
with the long metal door on the right side, grip the compact flash door with right hand and slide it toward
you to expose compact flash connector number one, slide door away from you to expose connector
number two. Insert the compact flash card and slide the door to the center (closed) position.
To remove cards, repeat the process above and depress the ejector button located at the extreme front
and rear of the compact flash door access areas.
The Mini DVR Pro uses multi-word DMA mode 2 compact flash only.
Mini DVR Pro™ Manual, Fast Forward Video, Inc.
Headphone / Line Audio Output mini-jack...
Standard 2.5mm Stereo connections
Tip
Left Output
Ring Right Output
Shank Ground
Power Connector
The mating connector: HR10A-7P-4S.
1
+7 to +25 Vdc - We use +9V.
2
+7 to +25 Vdc - We use +9V.
3
Ground
4
Ground
USB Pinout is Standard mini-USB.
8

Advertisement

Table of Contents
loading

Table of Contents