Table of Contents
Advertisement
Firmware Updating Procedure
New features for the FieldPro DVR are posted to our website as they become available. Our customers
have access to these features via firmware updates for the lifetime of the product. Please check this site
regularly to implement the newest changes.
Firmware updates are located at www.ffv.com in the Support
page.
Locate the latest revision of firmware for the video board (Recon Rev. 4). Download and unzip the files.
Hook up the FieldPro IDE DVR to your computer:
Hook a DB9 straight through cable to the 9 pin serial port of your computer.
Use DVR Master software to update firmware on FieldPro IDE:
Click the "Rev." button in the lower right corner of the DVR Master window. The revision date is shown
for both the operation firmware and the boot firmware.
Click the "Update" button to update the firmware. A file selection window opens to select the update file.
Select the file and click "Open". When the file has loaded properly, the message "Firmware Update
Successful - Turn OFF power to DVR" should be displayed. Turn OFF power for about two seconds and
re-apply power to the DVR.
FieldPro DVR ™ Manual, Fast Forward Video, Inc.
9
Advertisement
Table of Contents
