Attaching The Speaker Pads - Sony MHC-RV999D Operating Instructions Manual

Notes
• The type of speakers supplied varies according to the
model you purchased (see "Specifications" on
page 68).
• Do not place the surround speakers on top of a TV.*
This may cause distortion of the colors in the TV
screen.
• Be sure to connect both left and right surround
speakers.* Otherwise, the sound will not be heard.
• You cannot set the color system in Power Saving
Mode (page 51).
• When you play back a VIDEO CD recorded in a
different color system from the one you set to the
unit, the picture image may be distorted.
* Except for MHC-RV777D
To connect optional components
See page 56.
Inserting two R6 (size AA)
batteries into the remote
Operating a Sony TV
You can use the following buttons on the remote
to operate a Sony TV.
To
Turn the TV on or off
Switch the TV's input source
between the TV and other input
sources
Change the TV channels
Adjust the volume of the TV
speaker(s)
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
10 GB
e
E
E
e
Press
TV ?/1
TV/VIDEO
TV CH +/–
TV VOL +/–

Attaching the speaker pads

Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
For MHC-RV999D
Small speaker pads for
front speaker (Left (4)/Right (4))
surround speaker (Left (4)/Right (4))
center speaker (2)
Large speaker pads for
sub woofer (4)
For MHC-RV888D/RV777D
Front speaker (Left (4)/Right (4))
1)
Center speaker (2)
Front speaker
2)
Surround speaker
2)
Sub woofer
1)
Center speaker
1)
Except for MHC-RV777D
2)
MHC-RV999D only