Full Acoustic Guitar Bridge; Full Acoustic Guitar Tailpiece (Gb10); Full Acoustic Guitar Strap Button - Ibanez Instruction Manual

Full acoustic guitar bridge

Adjusting the action
To adjust the height of the entire bridge, use your fi ngers to turn
the adjustment spinners located at the left and right ends of the
bridge. (It is not possible to individually adjust the height of each
string.)
Adjusting the intonation
To adjust the saddle position, loosen the strings and move the
entire bridge.
Tune the guitar correctly before checking the intonation.
Memo
When loosening the strings, take care that the bridge does not
fall over.
When replacing the strings, we recommend that you replace
them one by one, since the bridge location will shift if you
remove all strings at once.

Full acoustic guitar tailpiece (GB10)

The full acoustic guitar tailpiece installed on the GB10 allows the
height of strings 1--3 and the height of strings 4--6 to be adjusted
independently. Tightening the adjustment knob will lower the
height of the tailpiece.

Full acoustic guitar strap button

Full acoustic guitars do not have a strap button installed on the neck side of the instrument.
If you would like to have a strap button installed, please contact your dealer or Ibanez Corporation.
60