Intonation Adjustment - Ibanez Instruction Manual

Intonation adjustment

1.
Remove the intonation adjustment bolts stored in the
tremolo unit, and screw them into the adjustment holes at
the rear of the saddle until the bolt tips touch the wall of
the tremolo unit.
2.
Use an Allen wrench (2 mm) to loosen the saddle lock
bolt, and turn the intonation adjustment bolt to adjust the
saddle position.
Before checking the intonation, fi rmly tighten the saddle lock
bolts and tune the guitar correctly. When you've fi nished making
adjustments, tighten the saddle lock bolts and the pressure pad
bolts of the locking nut, and store the intonation adjustment bolts
inside the tremolo unit.
String replacement
Install new strings by passing them through the tremolo block
from the back side of the guitar body.
EN
57
➤➤