More Features - Sony Ericsson T310 User Manual

More features

Data calls
Data calls
To make data calls you need to connect your
phone to a computer, and then start the appropriate
software program.
Receive data calls
The procedure of receiving data calls depends on your
network and subscription. If you have separate numbers
for voice and data calls, your phone will recognize the
type of call.
To receive a data call (separate numbers)
1. Connect your phone to a computer via IR or an RS232
accessory cable.
2. Answer the call from within the software program (if it
does not answer automatically).
You cannot answer a data call by pressing the
on the phone.
70 More features
This is the Internet version of the user's guide. © Print only for private use.
One number
If you have a SIM card that does not support a separate
data number, the phone does not recognize the type of
incoming call.
If you want to receive a data call, you have to set the
phone to this option. Once you have set your phone for
a specific incoming call, it stays like this until you
change it.
To select the next incoming call type
• Scroll to Calls,
Alarm clock
The alarm can be set to ring at a specific time within 24
hours, or recurrently at a specific time on several days.
You can have both these alarms set at the same time.
Even if you have set your phone to silent, the alarm
and timer signals ring. The alarm clock also rings if the
phone is turned off.
To set an alarm
key
YES
1. Scroll to Organizer,
Recurrent alarm,
2. Enter the time,
and pressing
, Next call, , Next incoming,
YES YES
, Alarms, , Alarm or
YES YES
.
YES
and day, if recurrent, by scrolling
YES
, .
YES
.
YES