Chinese Input - Sony Ericsson T310 User Manual

Entering letters and characters
You can enter letters, for example, when you add
names to the phone book, write text messages or enter
WAP addresses.

Chinese input

Your phone has different input methods for entering
Chinese characters. These include:
• Stroke input
• Pinyin input
Before you start, select Chinese as the input language.
To select Chinese as the input language
1. Scroll to Settings,
YES
2. Scroll to Chinese and press
pressing .
YES
Switching between Chinese input methods
In the Chinese editing mode, press and hold
switch to another input method. Press and hold
to switch to another input language or to a
numeric alphabet.
12 Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
, Language, , Input,
YES YES
. Confirm and exit by
You can also switch to another input language or
input method by pressing
Language or Input method. Scroll to the input
language or input method you want and press
General instructions for entering
Chinese characters
Whenever you enter a stroke or a Pinyin letter, a
candidate row of the most frequently used characters
containing that stroke, or relating to that letter or
symbol, appears at the bottom of the display. The most
frequently used character always appears in the middle
of the candidate row and is highlighted automatically
by the cursor. The next most frequently used characters
.
appear at either side. If the character that is highlighted
is the one that you want, press
or to go to the character that you want.
If the character that you want is not displayed in the
candidate row, press
to
displayed. Press
is displayed, or enter the next stroke, letter or symbol,
and a new set of characters will be displayed in the
candidate row. To go back to a row that was previously
displayed, press
and then selecting
to enter it, or use
YES
, and a new candidate row is
again until the character you want
or .
.
YES