Sony Ericsson T310 User Manual page 26

Specific ring signals for personal calls
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines. Line 1 and Line 2 are displayed instead
of Voice calls.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a personal
ring signal to numerous callers.
To set a specific ring signal for a caller
1. Scroll to Phone book,
Add new?, .
YES
2. Enter the first letter of the contact name,
3. Select a contact, .
YES
4. Select a ring signal,
YES
Sounds & alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone's vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
26 Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
, Personal rings,
YES YES
.
YES
.
To set the vibrating alert
1. Scroll to Settings,
Vibrating alert,
2. Select the setting you want,
From Settings/Sounds & alerts, you can also select:
• Message alert when messages are received.
• Key sound when using the keypad.
• Minute minder to beep after every minute during calls.
Menu language
,
Most SIM cards automatically set the menu language
to the language of the country where you bought your
SIM card. If this is not the case, the preset language
is English.
To change the menu language
1. Scroll to Settings,
2. Select a language,
Note: You can always choose Automatic by pressing
8888
You can always choose English by pressing
0000
, Sounds & alerts,
YES
.
YES
.
YES
, Language,
YES YES
.
YES
in standby.
in standby.
,
YES
, Menus, .
YES