Quick Bios Setup - SOYO SY-P4VTE User Manual

SY-P4VTE Quick Start Guide
3
3

Quick BIOS Setup

After the hardware installation is complete, turn the power switch on, then press the <DEL>
key during the system diagnostic checks to enter the AMIBIOS Setup program. The CMOS
SETUP UTILITY will be shown on the screen. Then, follow these steps to configure the CPU
settings.
Select [STANDARD CMOS SETUP]
Step 1.
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to "Auto".
Select [LOAD Optimal Settings]
Step 2.
Select the "LOAD Optimal Settings" menu and type "Y" at the prompt to load the BIOS
optimal setup.
Select [Exit]
Step 3.
Press <Enter> to save the new configuration to the CMOS memory, and continue the boot
sequence.
14