Related Manuals for Joovy Roo 0083X
Summary of Contents for Joovy Roo 0083X
- Page 1 0083X Patent Pending Joovy • 2919 Canton Street • Dallas, TX 75226 • USA • (877) 456-5049 • Fax: (214) 761-1774 Email: customerservice@joovy.com • Web Site: www.joovy.com ©joovy 2012 • Document Version 071012...
-
Page 2: Unpacking The Product
• Check your stroller for loose rivets, snaps, worn parts, and torn material or stitching on a regular basis. • Discontinue use of the stroller should it malfunction or become damaged. If you have a question regarding these instructions, please contact our Customer Service Department at customerservice@joovy.com or your local distributor. To locate your local distributor, go to www.joovy.com/locator.aspx. 1 Unpacking the Product • Remove everything from the box and identify the parts using Figure 1.1. (not to scale) A: stroller, B: 2 infant car seat adapters (1 Graco® and 1 Peg Perego®), C: rear wheel assembly, D: parent tray, E: 2 front wheel sets, F: rear basket frame tube (located in the rear fabric sleeve of basket), and documents (not shown). - Page 3 The following are the compatible infant car seat models that the Roo will accommodate: • Chicco® KeyFit 30 • Graco® SnugRide™ 35 • Peg Perego® Primo Viaggio SIP 30/30 For the most updated list of compatible infant car seats, please check our website at www.joovy.com. Page 2...
-
Page 4: Storage Basket
• Continue to hold these buttons and push forward on the handlebar until the stroller is completely folded. See Figure 12.2. CAUTION: While folding the stroller, be careful to keep your fingers from being pinched by moving parts. • Engage the fold lock on the right side of the stroller over the extended rivet. See Figure 12.3. WARNING ALWAYS keep children away from the stroller when folding. Maintenance Inspect all of the parts of the stroller periodically to ensure that they are secured, not torn or damaged and functioning properly. Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only original manufacturer’s components should be used. If needed, please contact Joovy. Cleaning The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth. Always allow the fabric to completely air dry before using the stroller. The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow, or other harsh environments. Use a sponge or cloth dampened with warm water and a mild household soap or detergent to clean the wheels after such use. SATISFACTION GUARANTEED We want you to be completely satisfied with your purchase of this product. - Page 5 12.1 10.1 10.2 12.2 12.3...