Connecting An Audio Cable - LG DRD-840B Owner's Manual

Interface
connector
IDE Cable
Figure 9. Connecting the IDE Cable
to the Interface Connector

CONNECTING AN AUDIO CABLE

Pin assignment
The pin assignment of the
audio output connector is
as follows.
GND GND
R-Channel L-Channe
* Pin assignment of the audio cable
GND
L-Channel
Figure 10. Connecting an Audio Cable
to the Audio Output Connector
Disc Hooks
Step 6. Connect the 40-pin IDE Cable to
Pin 1
Red-edge
If you want to connect audio equipment or
a sound card to the DVD-ROM drive, use
an audio cable to connect the drive to the
sound device.
l
Audio
Cable
to Audio
Equipment
(sound card)
GND
R-Channel
Note: This CD-ROM Drive can be used
• To use the drive vertically, open the
• Do not touch the unlabeled side of the
E-10
the back of the DVD-ROM Drive.
Please make sure that the red
edge of the IDE Cable is
connected to Pin 1 on the DVD-
ROM Drive.
vertically.
drawer and put a disc on to the 2 disc
hooks. Use only standard 12cm discs.
disc.