Table of Contents
Advertisement
Connecting the Sound Card
If the computer is using a sound card, the drive is connected to the sound card with an
audio cable. The supplied analog audio cable fits most sound cards or one can be
purchased at a local computer store.
Sound card
Device Drivers
When using Windows 2000 Professional/Me/XP Home Edition/XP Professional,
no special device driver is required. Your system, upon Power On and bootup
after installing and connecting the new Super Multi DVD Drive, will recognize
and load native software drivers automatically.
Please consult the following internet sites:
http://www.lgservice.com (then choose your country from the list)
For Windows 2000/ME/XP Users
■
In order to ensure normal drive operation, please check the following:
• The drive is displayed in
Windows ME : [Control Panel]-[System]-[Device Manager]-[CD-ROM]
Windows 2000/XP : [Control Panel]-[System]-[Hardware]-[Device Manager]-
• 32-bit is displayed in [Control Panel]-[System]-[Performance]
■
If the drive is not recognized by your computer, please check the following items.
• If an
indicator is displayed on the IDE controller in [Control Panel]-[System]-
[Device Manager]-[Hard Disk Controller], you will need to contact your PC's
manufacturer or the motherboard's manufacturer and get the appropriate IDE
controller driver.
■
Run Add New Hardware in Control Panel to let PC search again for new device.
SELECT
AUDIO OUT
C.SEL
CD INPUT
39
1
R GND L
SLAVE
IDE INTERFACE CONNECTOR
40
2
5V
GND
12V
MASTER
marking L-R
L
R
[DVD/CD-ROM-drives]
Refer to the manual for the sound card
for detailed information regarding this
connection.
Replacing the Computer Cover
When the installation of the drive unit is
complete, replace the computer cover
7
Advertisement
Table of Contents
