Lcm Description; Security Information - ZyXEL Communications AG-225H Quick Start Manual

2. LCM Description

Detect Mode
Display up to 15 detected networks
in the order of the signal strength.
Display the detected networks
without any security setting (free
hot spot).
Display the dedicated network you
choose to use.
Entry
Display the current
entry of the detected
Access Points. Users
can detect up to 15
networks at one time.
Channel
Display the radio
channel of the
detected network.
ZyXEL AG-225H Quick Start Guide
SSID
The SSID identifies the Service Set
to the network users detect. When
the length of SSID is longer than 12
characters, it will be scrolled
horizontally.

Security Information

Signal
This displays the wireless standard
and signal strength of the selected
network.
Battery Status
3
Displays when WEP security is
enabled.
Displays when WPA or WPA2
security is enabled.
Displays when Wireless security is
disabled (no security).
Displays when n-mode WEP,
WPA, or WPA2 security is enable.
802.11a mode at 5 GHz band
802.11b mode at 2.4 GHz band
802.11g mode at 2.4 GHz band
802.11n (pre-n) mode at 2.4 GHz
band
Display Low Battery
Display Full Battery
Display Battery is charging