ZyXEL Communications AG-225H Quick Start Manual page 19

3. Wireless LAN Network Setting
To connect to a network, you must set same SSID as the Access Point (AP) you
want to connect with and configure the security settings if any. AG-225H offers WEP,
WPA-PSK and WPA2-PSK for wireless network security.
When first time insert the AG-225H
1.
after driver installation, your computer
will auto detect the AG-225H driver.
2. Click the Network icon and select
Connect to a network and use
Windows Wireless Zero Configuration
(WZC) for security setting if any.
3. If wireless security is enabled for that network, the security setting window will
display, enter the appropriate WEP Key or WPA Pre-Shared Key (both are
case-sensitive) to match your AP and then click Connect to activate the
connection.
ZyXEL AG-225H Quick Start Guide
18