Pip Function - LG MT-60PZ12 Owner's Manual

PIP function

- Select RGB input source before pressing PIP
- This function works only when the interface board is installed.
Interface board (AP-60EA21) is not equipped on MT/Z-60PZ14 series models.
- This function works only in the following resolution;
640x480, 800x600, 1024x768 (only in Vertical frequency 60 Hz)
- When you select RGB for main picture in PIP/Twin picture, you can watch video, cable TV or DVD for
sub picture.
- Colour of main picture may be different from sub picture's in PIP/Twin picture mode.
- If input source for main picture is changed while in PIP/Twin picture mode, sub picture will disappear.
- When watching PIP/Twin picture,
- With PIP active, not all picture formats can be used for the main/sub picture.
PIP
26
option is not available in
Screen
Watching the PIP (Picture in Picture)
Press the PIP button.
• Each time you press PIP or
PIP size as below.
PIP [S]
menu.
F / G button, you can change the
PIP [L]
PIP F PIP [S] G
<Small PIP>
PIP F PIP [L] G
<Large PIP>
PIP F Off G
<Off>
Off