Random Play Shuffle (M.i.x.); Repeat Play; Displaying The Text - Alpine CVA-1014 Owner's Manual

iPod™ Operation (Optional)
To search for a song in the selected album
1 Press and hold the
encoder) for at least 2 seconds.
Press and hold :/J for at least 2 seconds to
2
select folder search.
Press g or f to select the desired
3
song.
4 Press the MODE (Rotary encoder).
The selected song will be played back.
Searching by song name
If a song is selected using the playlist/artist/album
search mode, new song searches will only display
songs from the current playlist/artist/album. To search
all songs in the iPod, select the "iPod name" in the
playlist search mode, and then perform the search.
1
When the monitor is open, press and hold the
MODE (Rotary encoder) for at least 2 seconds
during playback.
The unit switches to file/folder search mode.
2
Press and hold -/J for at least 2 seconds to
select folder search.
The song name is displayed.
3
Press g or f to select the desired song
name.
4
Press the MODE (Rotary encoder).
The selected song will be played back.

Random Play Shuffle (M.I.X.)

The Shuffle function of the iPod is displayed as
M.I.X. on the CVA-1014.
Shuffle Songs (M.I.X.):
All songs in the iPod are played back in random
sequence. If a song has been selected in the playlist/
artist search mode before selecting Shuffle song,
only the songs of the playlist/artist/album are played
back randomly.
1
Press FUNC.
The FUNC indicator lights.
2
Within 5 seconds, press 4 (
pause mode.
The songs will be played back in random
sequence.
→
M.I.X. (off)
(Shuffle Songs)
3
To cancel M.I.X. play, select (off) with the above
procedure.
NOTE
For details of the search mode, refer to "Searching for a
desired Song" (page 22).
24
-EN
MODE (Rotary
) in the play or
→
M.I.X.
(Shuffle Songs)

Repeat Play

1
Press FUNC.
The FUNC indicator lights.
2
Press 5 ( ) within 5 seconds.
The songs will be played back repeatedly.
REPEAT → (off)
(Repeat One)
Repeat One:
A single song is repeatedly played back.
3
To cancel repeat play, select (off) with the above
procedure.
NOTE
During repeat playback, no other songs are selectable by
pressing or touching g or f.

Displaying the Text

1
Press TITLE .
The mode will change every time the button is
pressed.
iPod mode:
The monitor is open. (displayed in the monitor)
TAG (TRACK/ALBUM/ARTIST NAME) DISPLAY
→ "----* /iPod" DISPLAY (fixed display) →
1
FRAME DISPLAY* 1
(TRACK/ALBUM/ARTIST NAME) DISPLAY
The monitor is closed. (displayed in sub-display)
"01" (fixed display)/ERAPSED TIME DISPLAY →
CLOCK DISPLAY → TAG (TRACK/ALBUM/
ARTIST NAME) DISPLAY → "----"*
(fixed display) → "iPod" DISPLAY (fixed display)
→ FRAME DISPLAY*
"01" (fixed display)/ERAPSED TIME DISPLAY
*1 "ROOT" is displayed when the file number is shown
as 01 (displayed "F-01" in the monitor).
*2 Though the numeric value displayed differs from the
actual sampling or bit rate (depending on head
unit), this is not a malfunction.
*3 The title cannot be input in the iPod mode. The
monitor display will be blank or the sub-display will
show " ."
_ _ _ _ _ _ _ _
NOTES
• Only alphanumeric characters (ASCII) can be
displayed.
• When the artist name, album name, or song name is
set on iTunes, and the amount of characters is
increased, songs may not be played back when
connected to the unit. Therefore, a maximum of 250
characters is recommended. The maximum number of
characters for the head unit is 64 (64 byte).
• Some characters may not be correctly displayed.
• "NO SUPPORT" (monitor) or "NO SUPRT" (sub-
display) is displayed when text information is not
compatible with the CVA-1014.
→ REPEAT
(Repeat One)
→ TITLE DISPLAY* → TAG
3
1 DISPLAY
→ TITLE DISPLAY*
2 3
→