Advertisement
JVC HR-DVS3U
Quick Reference
TO VHS/S-VHS TAPE:
1. Make sure the channel is on F-1.
2. Select S-VHS.
3. Press --> and the word DV will illuminate. The video should now show up in the monitor.
4. Cue your VHS/S-VHS tape using the controls on the deck.
5. Press REC on the deck and then press play on the computer. The video should play through to the deck.
6. When the video is done, press STOP on the deck.
NOTE: When using Final Cut Pro or Premiere, the video automatically plays through to the deck. When using iMovie, you will need
to set the program up to "play through to camera" in your preference menu. See the iMovie quick reference guide for more informa-
tion.
Also, this will work if you need to export a video to another output device that is hooked up to this deck in your studio. Use steps 1-4.
Doing a Live Show Without Using a Computer
When not using a computer, the directions are the same as if you are importing your show into the computer. The input devices feed-
ing the deck will go straight out the back of the deck to your CCTV system.
Guide
Exporting
TO DV TAPE:
1. Make sure the channel is on F-1.
2. Select -->.
3. Select DV.
4. Tell your editing program to put your video to tape:
In iMovie, select "Export movie."
In Final Cut Pro, select "Print to video."
In Premiere, select "Export" to tape.
NOTE: For details on exporting, see the program's own quick
reference guide.
5
Advertisement
