Safety Symbols; Safety Marking Symbols - ILX Lightwave LDT-5412 User Manual

S
AFETY
This section describes the safety symbols and classifications.
Technical specifications including electrical ratings and weight are included within the manual. See
the Table of Contents to locate the specifications and other product information. The following
classifications are standard across all ILX Lightwave products:
• Indoor use only
• Ordinary Protection: This product is NOT protected against the harmful ingress of moisture.
• Class I Equipment (grounded type)
• Mains supply voltage fluctuations are not to exceed ±10% of the nominal supply voltage.
• Pollution Degree II
• Installation (overvoltage) Category II for transient overvoltages
• Maximum Relative Humidity: <80% RH, non-condensing
• Operating temperature range of 0 ×C to 40 ×C
• Storage and transportation temperature of ñ40 ×C to 70 ×C
• Maximum altitude: 3000 m (9843 ft)
• This equipment is suitable for continuous operation.

Safety Marking Symbols

This section provides a description of the safety marking symbols that appear on the instrument.
These symbols provide information about potentially dangerous situations which can result in death,
injury, or damage to the instrument and other components.
or
(I)
iv
 Safety and Warranty Information
S A F E T Y S Y M B O L S
S
YMBOLS
Caution,
refer to
manual
Caution, risk
of electric
shock
On: In position of a bistable push control. The
slash (I) only denotes that mains are on.
Earth
ground
Terminal
Protective
Conductor
Terminal
or
(O)
Alternating
current
Caution, hot
surface
Off: Out position of a bistable push control.
The circle (O) only denotes that mains are off.
Visible and/or
invisible laser
radiation
Frame or
chassis
Terminal