Hand-Held Decode Aiming Pattern - Motorola DS3508 Product Reference Manual

Hand-Held Decode Aiming Pattern

Parameter # F0h, 32h
Select Enable Hand-Held Decode Aiming Pattern to project the aiming pattern during bar code capture, Disable
Hand-Held Decode Aiming Pattern to turn the aiming pattern off, or Enable Hand-Held Decode Aiming Pattern
on PDF to project the aiming pattern when the digital scanner detects a 2D bar code.
This parameter does not apply to Snapshot Mode. See Operational Modes on page 5-4.
NOTE With Picklist Mode on page 4-23 enabled, the decode aiming pattern flashes even when the Decode
Aiming Pattern is disabled.
*
Enable Hand-Held Decode Aiming Pattern
(02h)
Enable Hand-Held Decode Aiming Pattern on PDF
(03h)
User Preferences & Miscellaneous Digital Scanner Options 4 - 29
Disable Hand-Held Decode Aiming Pattern
(00h)