Jpeg Target File Size; Jpeg Quality And Size Value - Motorola DS3508 Product Reference Manual

Digital scanner
Hide thumbs Also See for DS3508:
Table of Contents

Advertisement

5 - 12 DS3508 Product Reference Guide

JPEG Target File Size

Parameter # F4h, F1h, 31h
Type: Word
Range: 5-350
This parameter defines the target JPEG file size in terms 1 Kilobytes (1024 bytes). The default value is 160 kB
which represents 160 Kilobytes.
CAUTION
To set the JPEG Target File Size parameter, scan JPEG Target File Size below followed by three numeric bar
codes representing the value. Leading zeros are required. For example, to set an Image Brightness value of 99,
scan 0, 9, 9 in
Appendix D, Numeric Bar
JPEG Target File Size
(3 digits)

JPEG Quality and Size Value

JPEG Quality = Parameter # F0h, 31h
If you selected JPEG Quality Selector, scan the JPEG Quality Value bar code followed by 3 bar codes from
Appendix D, Numeric Bar Codes
image.
JPEG compress may take 10 to 15 seconds based on the amount of information in the target image.
Scanning JPEG Quality Selector (default setting) on
consistent in quality and compression time.
Codes.
corresponding to a value from 5 to 100, where 100 represents the highest quality
page 5-11
produces a compressed image that is
JPEG Quality Value
(Default: 065)
(5 - 100 Decimal)

Advertisement

Table of Contents
loading

Table of Contents