OCR Maximum Characters
Parameter # F1 B2h
To select the maximum number of OCR characters (including spaces) per line to decode, scan the following bar
code, then scan a three-digit number between 003 and 100 using the bar codes in
Codes
representing the number of OCR characters to decode. Strings of OCR characters greater than the
maximum are ignored. The default is 100.
OCR Maximum Characters
OCR Security Level
Parameter # F1 2Ah
To select the OCR decoding security/confidence level, scan the following bar code, then scan a two-digit number
using the bar codes in
minimize OCR decoding errors but reduce performance. Setting a value that is too high can result in failure to
decode. Setting a value that is too low can cause decoding errors. The range of the security level is 10 - 90 and the
default is 80.
Appendix D, Numeric Bar Codes
representing the level of confidence. Greater numbers
OCR Security Level
OCR Programming 10 - 13
Appendix D, Numeric Bar