Specifications - Schumacher Electric XP400 Owner's Manual

PROBLEM
The Instant Power™ won't
power my 12v device.
The battery in the Instant
Power™ won't hold a
charge.
If the above solutions do not eliminate the problem or for information about troubleshooting
or replacement parts, call toll-free from anywhere in the U.S.A.
7:00 am to 5:00 pm Central Time Monday through Friday
12.

SPECIFICATIONS

Internal Battery Type
Nominal voltage
Capacity
dC Power Output (Maximum
Continuous Load)
Peak Amps
Cranking Amps
Cold Cranking Amps
Battery Hookup Cables with Clamps
dimensions (H x W x d)
Weight
POSSIBLE CAUSE
The 12v device is not
turned on.
The Instant Power™ battery
is not charged.
The 12v device draws more
than 15A or has a short
circuit
The battery is bad (will not
accept a charge).
1-800-621-5485
Model XP400
Sealed, Maintenance Free, AgM, Lead Acid
12v dC
5 Ah
15A
400
175
116
8 gauge, AWg, 18" (45.72 cm) Long
10 x 10.25 x 5.25 (25.4 cm x 26 cm x 13.3 cm)
7 lbs (3.18 kg)
11
• •
REASON/SOLUTION
Turn on the 12v device.
Check the battery charge
status by pressing the
button on the front of the
Instant Power™. See LEd
Indicators section of this
manual.
disconnect the 12v device.
The internal breaker will
automatically reset after a
minute or two. Try the 12v
device again. If it happens
again, replace the 12v
device.
Have the battery checked.