Do you have a question about the SL1519 and is the answer not in the manual?
Questions and answers
Richard Brown
February 16, 2025
If the Schumacher charger SL1439 is fully discharged due to lack of use and sitting; how do you get it to take a charge?
1 comments:
Mr. Anderson
February 16, 2025
To charge a fully discharged Schumacher Electric charger SL1439:
1. Use a 2A USB charger (not included) or a 2A USB charging port for faster charging. 2. Connect the Micro USB end of the charging cable to the charger's input port. 3. Connect the USB end of the cable to the USB port of the charger. 4. Plug the charger into a powered electrical outlet. 5. The LED indicators will display the charging progress: - Blinking red LED: 0-49% charge. - Solid red LED and blinking yellow LED: 50-75% charge. - Solid red and yellow LEDs with blinking green LED: 76-99% charge. - Solid green LED: 100% charge. 6. The charger will be fully charged in approximately 3-4 hours.
Summary of Contents for Schumacher Electric SL1519
Page 1
Arrancador y fuente de alimentación USB de iones de litio Démarreur d’appoint et source d’alimentation USB au lithium-ion FOR MODELS / PARA MODELOS / POUR LE MODÈLES SL1435 SL1439 SL1519 SL1562 SL1567 OWNERS MANUAL MANUAL DEL USUARIO MANUEL D’UTILISATION PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the jump starter safely and effectively.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS...............................4 PERSONAL SAFETY PRECAUTIONS ..........................................4 FEATURES ..................................................5 CHARGING THE INTERNAL BATTERY OF THE JUMP STARTER..................................5 OPERATING INSTRUCTIONS ............................................5 MAINTENANCE AND STORAGE ............................................6 TROUBLESHOOTING .................................................6 REPLACEMENT PARTS ..............................................7 BEFORE RETURNING FOR REPAIRS ..........................................7 LIMITED WARRANTY ................................................7 CONTENIDOS INSTRUCCIONES IMPORTANTES DE SEGURIDAD –...
FOR MODELS SL1435 OWNERS MANUAL SL1439 SL1519 PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the jump starter SL1562 safely and effectively. Please read and follow these instructions and precautions carefully.
FEATURES 1. Battery clamps 2. Micro-USB charging port 3. Ready/Fail LED 4. Battery status/Light button 5. Battery status indicators 6. Built-in work light 7. ON/OFF Power switch 8. USB port 9. Air compressor ON/OFF switch 10. Air compressor gauge 11. Air compressor hose wrap cleats 12.
USING THE WORK LIGHT 1. Position the jump starter on a flat, stable surface near the intended work area. 2. Ensure the battery clamps are securely clipped on the storage holders. 3. Flip the ON/OFF power switch to the ON position. 4.
Ready/Fail LED Behavior Green LED lit solid Ready to jump start Red LED lit solid and buzzer sounds continuously Short circuit protection No LED lit and no buzzer beep Battery low voltage protection Flashing LED alternates between Green and Red Reverse charging protection Red LED flashing and buzzer sounds twice per second Reverse polarity protection...
SL1435 MANUAL DEL USUARIO SL1439 SL1519 POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES DE CADA USO. En este manual le explica SL1562 cómo utilizar el arrancador de manera segura y confiable. Por favor, lea y siga las siguientes instrucciones y precauciones.
CARACTERÍSTICAS 1. Pinzas de la batería 2. Puerto de carga micro-USB 3. LED Listo/Falla 4. Botón de estado de la batería/luz 5. Indicadores del estado de la batería 6. Lámpara integrada 7. Interruptor de ENCENDIDO / APAGADO 8. Puerto USB 9.
CÓMO UTILIZAR LA LUZ DE TRABAJO 1. Coloque el arrancador sobre una superficie plana cerca del área de trabajo. 2. Asegúrese que las pinzas estén fijas en el compartimiento. 3. Mueva el interruptor de encendido / apagado a la posición de encendido. 4.
Comportamiento del LED Listo/Falla LED verde encendido Listo para función de arrancador LED rojo encendido y sonido continuo del zumbador Protección de cortocircuito Sin LED encendido y sin un sonido del zumbador Protección contra bajo voltaje de batería LED parpadeando y alternando entre verde y rojo Protección contra carga inversa LED rojo parpadeando y sonido del zumbador dos veces por segundo Protección contra polaridad inversa...
MANUEL D’UTILISATION SL1435 SL1439 ESSAYER DE GARDER LE MANUEL D’INSTRUCTIONS ET LE LIRE AVANT CHAQUE UTILISATION. SL1519 Ce manuel explique comment utiliser l’unité d’une façon sûre et efficace. S’il vous plaît lisez et suivez ces instructions et précautions. SL1562 SL1567 CONSIGNES DE SÉCURITÉ...
CARACTÉRISTIQUES 1. Pinces de batterie 2. Port d’entrée Micro USB pour recharger 3. Témoin DEL Ready/Fail (Prêt/Échec) 4. Bouton pour l’état de la batterie et la lumière 5. Indicateurs d’état de la batterie 6. Lampe de travail intégrée 7. Interrupteur ON / OFF 8.
UTILISATION DE LA LAMPE DE TRAVAIL 1. Placez le démarreur d’appoint sur une surface plate et stable près de l’aire de travail. 2. S’assurer que les pinces de batterie sont correctement mis sur les supports de stockage. 3. Placez l’interrupteur d’alimentation à la position ON. 4.
Comportement du témoin DEL Ready/Fail (Prêt/Échec) Témoin DEL vert fixe Prêt pour le démarrage d’appoint Témoin DEL rouge fixe avec avertisseur sonore continu Protection contre les courts-circuits Aucun témoin DEL allumé, sans avertisseur sonore Protection de basse tension de la batterie Témoins DEL clignotant en alternance entre vert et rouge Protection contre l’inversion de charge Témoin DEL rouge clignotant et avertisseur sonore retentissant deux fois par seconde...
Need help?
Do you have a question about the SL1519 and is the answer not in the manual?
Questions and answers
If the Schumacher charger SL1439 is fully discharged due to lack of use and sitting; how do you get it to take a charge?
To charge a fully discharged Schumacher Electric charger SL1439:
1. Use a 2A USB charger (not included) or a 2A USB charging port for faster charging.
2. Connect the Micro USB end of the charging cable to the charger's input port.
3. Connect the USB end of the cable to the USB port of the charger.
4. Plug the charger into a powered electrical outlet.
5. The LED indicators will display the charging progress:
- Blinking red LED: 0-49% charge.
- Solid red LED and blinking yellow LED: 50-75% charge.
- Solid red and yellow LEDs with blinking green LED: 76-99% charge.
- Solid green LED: 100% charge.
6. The charger will be fully charged in approximately 3-4 hours.
This answer is automatically generated