Inserting The Batteries - Jenoptik JD 2100m User Manual

INSERTING THE BATTERIES

This camera uses four AA-size alkaline or Ni-MH batteries.
* When using AA-size Ni-MH batteries, fully recharge them with a vendor-endorsed battery charger.
22
1 When replacing the batteries, slide the power switch to turn off the
camera.
• You may skip this step when inserting the batteries for the first time after a
purchase.
2 Slide the battery-chamber door slightly in the 1 direction and open it
in the 2 direction.
3 Insert the batteries by following the +/- diagram indicated in the back
of the battery-chamber door.