CDA ci860 Manual For Installation, Use And Maintenance page 29

Display and Failure Codes
Your machine is equipped with diagnostic systems which monitor
wash progress and will intervene to protect the washer dryer in the
event of a fault.
Failure Code
E01
E02 or
E03 or
E04
Probable failure
The door is not shut
properly.
Water cut off or low
water pressure.
Pump is damaged,
pump filter is clogged
or pump electrical
connection is faulty.
Water level excessive
The process to be done
Shut the door properly so that you hear the
click then press the "Start" button.
If the error persists, unplug the machine, close
the water tap and contact CDA Customer Care.
Make sure the tap is turned on and water
pressure is normal.
If water is turned off switch the programme
selector knob to the "0" position, turn water on
and then re-select programme.
Check the inlet hose is not kinked.
Check the water inlet filters are not blocked.
If the error persists, unplug the machine, close
the water tap and contact CDA Customer Care.
Clean the pump filter. If the error persists,
unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
29