Pump Filter - CDA ci860 Manual For Installation, Use And Maintenance

Pump Filter

The pump filter system prevents ingress of lint or foreign objects into
the drain pump, reducing the risk of damage.
The pump filter should be cleaned regularly, every two to three
months at least.
To avoid injury, do not carry out this operation when the wash
water is at a temperature over 30ºC
To clean the filter:
• Open the pump cover by levering
it out using the detergent spade or
similar plastic item (fig. 4).
• Place a container under the filter
cover to collect any remaining water
draining from the machine.
• Loosen the filter cover by turning
it slowly anti-clockwise until the
remaining water has drained away.
• It may be necessary to reseal the
pump cover and empty the container
to prevent the container from
overflowing.
• When all the water has drained out
of the machine, turn the filter cover
several times until the filter can be
completely removed.
• Remove any objects caught in the
filter and the drain pump.
24
fig. 4
fig. 5
fig. 5